Advanced perimeter intrusion detection system

NELCO in collabration with GALDOR/SECOTEC offers proven, effective, perimeter detection system, in use world wide.

Multisensor is based on a unique technology which uses an outstanding sensor cable that can be attached to any type of fence, walls, barbed wires, concertinas and can be buried underground as a concealed detection system.

Mechanical stress to the sensor cable is automatically converted to electronic signals that are instantly sensed by detection unit connected to both ends of the cable. The controller processes all incoming signals which are analyzed by the microprocessor based on Digital analyzer for frequency, amplitude, time sequence and other parameters. Features : Very high sensitivity Low maintenance Very low false alarm rate. Smart electronics with fully programmable parameters.

A unique controller connected to the detection unit is able to distinguish between actual intruder and false alarms by means of user setup parameters.

HWS version provides relay dry contacts that can be connected to any standard alarm panel. The CMS version contains a multiplex transponder installed in the controller and transmits the alarm signal via a single communication cable to a Pentium PC with Galdor / Secotec dedicated color graphics Windows NT based on COM-4000NT system. The CMC version allows the user to control the system sensitivity and system test, as well as other field functions from the PC keyboard.

The COM-4000NT can also receive inputs from other alarm sensors and devices, permitting it's use as a powerful control center for integrated security system.

Multisensor is easily installed on any type of mesh fence, barbed wire, a concertina, walls and under the ground.